Відео

Even I could do it. Excellent video. I’d advise that you change both.

What if the filter is stuck and not popping out?

Wow. Never showed how it connects to back of ice maker. The whole reason I watched

I wish you mentioned to note to instal the metal piece on the lower part of the rack I did the higher part and now I broke the piece trying to in latch it to fix it Uhg I know I’m the idiot but it’s just so frustrating

Thank you so much!!!! One quick observation is that if you are small and not so strong person, stand on a stool. It was so much easier, I did it on the first attempt.

Man these companies just suck- doing things the absolute dumbest ways

Oksy. I'm doing this now but someone added like 5 more screws I can't reach. I just grabbed mty bolt cutters. Clearly things aren't going my way!

Thanks, my fan just stopped right before we went to bed. I was literally doing this in the middle of the night so our food wouldn’t spoil. I bought a fan because I thought it may go bad from the sounds of things.

Great video, but you're going to run into problems with old machines. My machine is 9 years old, I needed an impact driver to get the wash plate screw out, and ended up have to cut/chip out the wash plate, as after 9 years of heavy use, the metal connection between the gear case and the wash plate had corroded together. (I cracked the wash plate plastic from pulling up on it with metal hooks.) But new wash plate and new gearbox have gotten it back up and running and it is super quiet once again.

Great video allowed me to see the part I needed and also the tool that I needed and the steps I needed to take; THANKS!!!

Thanks for the info, it was very helpful

The video shows the mechanic opening both valves in the beginning as he states to close them. In the end of the video, the mechanic is shown closing the valves as he states to open them! << Turn to the right to close and to the left to open >>

I have a dryer stacked on top of my washer. Do you have suggestions for how to safely lift it off?

Great design there GE 😢

THANKS for the video, you make it look simple. I am going to attempt this, wish me luck.

This is very helpful and well-explained. Can a bad damper be diagnosed before having to replace it? My refrigerator runs all the time, and the milk gets ice in it, regardless of the temperature setting.

Wow, for a well built guy like yourself this was like keyhole surgery

Update after spending $200 to get the new gasket and having a GE trained tech install it the gasket popped out and I had to hammer it back in barely. GE is a terrble product. The handles broke off a couple of years ago and now the gasket needed to be replaced and the GE tech struggled for over 2 hrs till he almost passed out trying to put it in. The repair shop laughed thinking it was going to be a simple job but then they found out what kind of mess it is.

Thanks

I would have clarified that the orientation of the gasket is important. Make sure you check how the gasket is installed and also check the installation instructions on the new gasket. The original gasket at 0:50 looks to be flush with the "outside" of the groove of the tub and it tapers towards the inside of the tub. The new gasket at 1:57 looks flush to the "inside" edge of the groove on the tub and then it tapers towards the outside of the tub. It may be an optical illusion but that's how it looks to me. I installed the gasket the way I see it at 1:57 and my dishwasher leaked. I thought the leaks were because of a faulty door latch or door hinges (my 4 yr old likes to mess around with the dishwasher door). I removed the tub gasket and checked again to ensure it was not damaged or compressed. There is text written on one side of the gasket instructing to orient that side towards the inside of the tub (i.e. opposite to the outside perimeter). Problem solved, no more dishwasher leaks for now.

My freezer door handle just broke all the way off and the whole assembly that holds the mounting pin on the right side broke of and fell out. My model number is rf263beaesg/aa -- what parts do I need to replace that bit and put the handle back on??

The engineers for Whirlpool/KitchenAid purposefully made this SO hard. Can't even remove a drawer for cleaning without spending an hour mangling the 2 'tabs. BTW - my $4k Kitchenaid for 5 years still doesn't make ice.

Thanks for the video!! Fixed (we will see as the dishwasher is running 🏃‍♂️ 😅now). Anyway. Very good video!! Very helpful

This is the only to watch if your having issues with your washer gps part by part and explains it very well with the visuals good 👍🏼 for everyone to fix at home

RE: WTW4800BQO ISSUE: 1st fills with water 2nd slow rpm spin , no agitation . I hear a ratching sound ( unless i carefully apply Pressure downward on top of agitator. After re moving agitator and applying pressure downward on top of shaft same result .. It agitates as long as doward press- remains) Question: Could this be the clutch? Hopefully not the gearcase.😮 Thanks in advance

The models that have the plastic piece and metal clip on top the spanner nut. If the plastic piece and metal clip is missing would it prevent agitation? RE:WTW4800BQ0 Im only getting a slow rpm spin after water fills up. Your diagram shows a different style cam kit. Ig i apply pressure to top of agitator it agitates properly.

My grey part broke on the fridge door...

Excellent video, really well done. Thank you!

Fantastic video, thank you!

Please make a complete disassembly for cleaning all the absurd cracks & seams.

This might be my issue. I have a samsung WA40J3000AW/AA 12. It stopped going through cycles. You have to manually select the next cycle.

But the light our fridge got is in the upper side & doesn’t light on but we tested & it lights

Fantastic help!

Diagnosing the sensor as the problem would be more helpful. My GE washer says "motor not rotating properly" and will not work. There is no algorithm to diagnose the problem.

Thank you so much for your video…..doing our replacement as soon as part comes in the mail. This is exactly the help I needed

JUST PERFECT!! I had two problems - somehow a connector disconnected (and disappeared) from my drinking water line...causing water to leak on the floor every time I used the water dispenser on the front of the fridge. When I got it open in back....THIS entire drain tube here was cracked and in pieces...that's a smaller leak...but still a leak. Your video, unlike SO many others online, was clear, concise, and simply produced. Step-by-step instructions allowed me change it (AND the other) in about ten minutes...I'm 6'6"/245...lying on the floor is NOT easy!!! Thanks again! I feel badly that I had already purchased my part before finding your video. Next time, I buy from you...I have a couple of rental properties that often need repairs!

This worked and my LG stopped tripping the electrics.

I just finally installed the ice maker I got from you guys. Other than it really took a good yank and push to get the big mount off the door. It was fairly easy. Thank you for the video, had my iPad by my side in the kitchen. Now it’s plugged in and chilling back down. I’ll edit when it starts dumping ice. Joe Edit: It is making ice. Yay! Took a while for it to settle down, but it’s dumping ice. Now let’s see how long this lasts. I’m not confident but we shall see. I will never buy a Samsung appliance again. TV’s are great, this is not great. Thanks to AppliancPartsPros for being great.

Geez this guy really trying to make his job look difficult and important 😂

now if it only played

nice job,good activity

Newer models they stupidly used super glue on fan part. After getting bolt off. Use a heat gun to get center of blower fan off. Otherwise your not getting it off.

Absolutely outstanding and clear video! Beautiful work and this solves my problem 100%!

Thanks , excellent video

Came here to see how to clean the glue off but you skipped that and how long do you leave it sit to dry?

How do you remove the housing on kitchen aid in door ice maker model krfc704ss01

Excellent video. I can echo all previous comments on how instructive this is. Saved me a lot of money. I’m now going to check my toolbox to make sure I haven’t left any tools in the dryer like our fellow reviewer. 😂

My refrigerator is leaking from the blue line your showing in this video where does that line go to and what’s it called?

Very help. Thanks.

Thank you for the clear instructions. This was an easy 15 minute fix.